The key function of the cabinet vibration damping system is to suppress the repeated movement of the bomb and the impact from the ground when it rebounds after an earthquake. When the car goes through an uneven ground, it can filter the vibration of the ground according to the shock absorber. In order to improve the comfort and safety factor of the car, how can we distinguish the advantages and disadvantages of the cabinet vibration reduction system manufacturers? Today I will take everyone to have a brief understanding.

First, press the head or the rear side of the car vigorously, and then immediately loosen it. If the car only jumps one or two times, it indicates that the cabinet vibration reduction system is working well. The following four conditions indicate that the cabinet is reduced. Vibration system manufacturers have certain problems, and they must repair them immediately. The following: The car is slow to drive, and then stops in an emergency, the car vibrates more strongly; when the car goes through the rubber speed bump, if it jumps three to four times; the cabinet vibration damping system two Oil seepage on the side road; driving on the ground with good real-time road conditions, I heard the noise of the cabinet vibration reduction system manufacturer. The above four conditions indicate that the cabinet vibration reduction system manufacturer has problems.

The service life of cabinet damping system manufacturers is generally longer. Under all normal conditions, it is not a big problem to apply five to six yuan or eight to one hundred thousand kilometers. If there is an oil leakage or noise, the Under such conditions, only one has to be removed and replaced. It is not necessary to remove and replace all of them. If the real-time road conditions of the daily driving are not ideal, and often run on some non-paved roads, the number of kilometers of the car will also be higher. Under such conditions, it is best to replace the upper and lower two in addition. Because the damage of the cabinet vibration reduction system is very related to the usual real-time road conditions, I only replace one if the strength of the two sides is relatively large. , It will endanger the reliability of the car.

The cabinet vibration damping system is one of the key parts of the car suspension system software. It can bounce back and bounce back. The shock absorbs vibration and deformation and reduces the shock generated by the ground. In addition, this is also a comment on the pros and cons of a car. It is an important element. Therefore, the cabinet vibration reduction system is a very critical entity. During the entire application process, maintenance should be done on time to increase its service life. In addition, it can also ensure the comfort of the driver. And safety.